Hollon WSE-2114 Heavy Duty Electronic Wall Safe

Hollon Safe Company

Regular price
Price: $199.00
Regular price
List Price:
Sale price
Price: $199.00
Free Shipping on Every Order and We Pay The Sales Tax | No Code Needed | Ends:
View Cart
  • Free shipping on every item — UPS or FedEx, or freight delivery for heavy items
  • We pay the sales tax on every order
  • Authorized Hollon Safe Company dealer
  • Secure checkout
  • Questions? Email info@garagetoolsstorage.com, or call or text 765-221-3366 — we answer every one.

Shipping Policy

How your safe ships. Safes over 125 lbs ship by LTL freight rather than parcel carrier, palletized on a truck with a liftgate. The carrier telephones you to arrange a delivery appointment. Someone aged 18 or over must be present to receive and sign. Liftgate service is included at no extra charge.

Freight delivery is curbside. The driver lowers your safe from the truck to ground level at the end of your driveway, or at your dock for a commercial address. That is where the delivery ends. Drivers will not bring the safe inside, take it up or down steps, move it to a particular room, unpack it, or anchor and install it. Drivers are typically allotted around 30 minutes per stop.

We do not arrange inside delivery, but you are welcome to arrange it directly with the trucking company when they call to schedule. Terms and charges vary by carrier and are payable to them.

Plan three things before you order.

  • Help and equipment. Check the weight in the specifications above. Anything above a few hundred pounds needs an appliance dolly or pallet jack rated for the load and two to four people, or a local mover or safe installer, which we would recommend above roughly 600 lbs.
  • A path that fits. Measure every doorway, turn and threshold against the exterior dimensions listed above. An inch and a half decides whether a safe reaches the room you bought it for.
  • A floor that carries it. A concrete slab handles any safe we sell. On a suspended timber floor, site the safe against a load-bearing wall and across the joists rather than parallel to one.

Inspect before you sign. Once you sign a clean delivery receipt, the carrier's liability generally ends. Walk the whole pallet and look for punctures, crushed corners, torn wrap, a leaning load or a cracked pallet. If you see damage, write down specifically what you see on the delivery receipt, for example "dent to top left corner of crate". Do not write "subject to inspection" or "possible damage" — carriers treat those phrases as a clean delivery and routinely use them to deny claims. Photograph the pallet before the truck leaves, damaged or not. If the damage is severe you may refuse the delivery outright; call us the same day so we can expect the return.

Reporting damage. Visible damage must be noted on the delivery receipt at the time of delivery. Concealed damage found after unpacking must be reported with photographs within 24 hours of delivery. Claims cannot be filed outside that window.

Processing. Safes are frequently built or finished to order, and we confirm the expected ship date with you by email after your order is placed. We send tracking within 24 hours of your safe leaving the warehouse.

Questions before you order? Call (888) 949-4945 or email info@garagetoolsstorage.com. Full terms are in our Shipping Policy.

Returns, Refunds & Cancellations

Before you order. A safe is not a parcel. Returning one means palletizing it, arranging freight collection and insuring it in transit, and the cost is substantial relative to the item. We would far rather help you choose correctly the first time. If you are unsure about size, fit, fire rating or lock type, call us on (888) 949-4945 and we will talk it through before you spend anything.

14-day returns on safes. Safes carry a shorter return window than the rest of our catalog, because that is the window our manufacturers give us. Please decide within two weeks of delivery.

  • Request a Return Authorization number within 14 days of delivery by emailing info@garagetoolsstorage.com. Returns arriving without an RMA number will be refused.
  • The safe must be unused and in original packaging, with all keys, hardware, manuals and warranty paperwork.
  • Freight is charged both ways, outbound and return, regardless of whether your order shipped free. Free shipping is a promotion on a completed sale, not on a returned one.
  • Return freight must be arranged through us so the safe is correctly palletized and insured. Please do not book your own carrier; an uninsured safe damaged on the way back cannot be refunded.
  • A 20% restocking fee applies.
  • Refunds go to the original payment method within 14 days of the safe arriving back and passing inspection.

Damaged on arrival is not a return. If your safe arrives damaged that is a freight claim, it costs you nothing, and no restocking fee applies. Note the damage on the delivery receipt, photograph it, and contact us — we will arrange collection and send a replacement.

Refused deliveries. A delivery refused because of visible damage costs you nothing. A delivery refused for any other reason — nobody home, changed your mind, no way to move it — is treated as a return: freight both ways plus the 20% restocking fee are deducted from your refund.

Cancellations. Cancel free of charge any time before your safe ships. Once it is on a truck it is a return.

Lost or forgotten combination. A safe you cannot open is not a fault and not a return. Start with the battery — see the Electronic Lock & Battery section on this page, which resolves most cases. If the combination itself is genuinely lost, the manufacturer can supply recovery details to the registered owner on proof of ownership and identity, normally through an authorized dealer or a licensed locksmith. Call us and we will start that process.

Full terms are in our Refund Policy.

Electronic Lock & Battery

If your safe will not open, start here. The most common cause by a wide margin is a weak battery, not a broken lock.

Changing the battery will not erase your code. This is the fear that stops people trying the obvious fix. Your combination is stored in the lock body inside the door, not in the keypad. It survives a battery change, and it survives a battery going completely flat.

The keypad can light up and the safe can still refuse to open. Lighting the keypad and sounding a beep draw almost no current. Retracting the bolts takes a motor or solenoid pulling a great deal more. A battery weak enough to fail the second job will often still manage the first — so "the keypad works, it can't be the battery" is the most common wrong conclusion in this whole situation.

Signs of a weak battery.

  • Repeated beeping during an unlock attempt. SecuRam SafeLogic locks give eight beeps; Sargent & Greenleaf 6120-series give twenty.
  • A low-battery message on locks fitted with a display.
  • The keypad accepting your code but the bolts not retracting, or retracting slowly.

Changing the battery on a safe that is locked shut. The battery lives in the keypad on the outside of the door, so a locked safe is still serviceable. On most SecuRam EntryPads, push up on the base of the keypad about a quarter of an inch to release the cover; keypads with a SureLock drawer open from the front instead. Fit a fresh good-quality alkaline — not a rechargeable and not a bargain multipack, both of which sag under load — and enter your code again.

Replace the battery once a year whether or not it has given trouble, and always before leaving a property empty for a long stretch.

Beeping every few seconds rather than continuously? That is a lockout. Too many wrong entries put the lock into a penalty lockout, typically somewhere between five and twenty minutes depending on the lock fitted. Leave the keypad alone and wait it out. Pulling the battery does not clear a lockout — it only pauses the countdown, which resumes when power returns.

Biometric locks need feeding more often. A fingerprint reader draws considerably more than a keypad, roughly 4,000 openings per battery against 10,000 or more. If your safe has a biometric lock, move to a six-month replacement habit.

Still will not open? Call us on (888) 949-4945 with your model number and approximate purchase date to hand. Do not drill a safe, or let anyone else drill it, before speaking to us — on a fire-rated or TL-rated safe an unnecessary drilling destroys both the rating and the warranty.

Hollon WSE-2114 Heavy Duty Electronic Wall Safe

The Hollon WSE-2114 is an in-wall safe that installs between standard wall studs and sits nearly flush with the finished wall. The part that goes into the wall measures 21" high, 13 7/8" wide and 3 3/4" deep, and the front flange that covers the cut edges measures 22 3/16" x 14 15/16". Hung behind a picture, a mirror or inside a closet, it keeps passports, cash, jewelry and spare keys out of sight without taking up floor space.

Inside there is about 0.5 cubic feet of space: 19" high, 14" wide and 3 1/8" deep, divided by two interior shelves. The door is 1/8" steel on a heavy-gauge steel body and is held by two round locking bolts. Access is by a digital keypad with an LCD display that holds one master code and one user code, and a key override is included in case the electronics fail.

Installation is a typical do-it-yourself job for anyone comfortable cutting drywall: find the studs, mark the opening to the base size, check the bay for wiring and pipes, cut, test-fit and fasten the body to the framing.

A wall safe is a concealment safe. It is not fire rated, and its strength depends on how well it is fastened in the wall. For more resistance to pry attacks it can be set in a masonry or concrete wall. Before you buy, check your wall depth and stud spacing against the figures below.


Key Features

  • Fits between studs: In-wall base of 21" x 13 7/8" x 3 3/4".
  • Low-profile mounting: Flange of 22 3/16" x 14 15/16" sits close to the wall surface.
  • Electronic keypad: LCD display; one master code and one user code.
  • Override key: Opens the safe if the keypad cannot be used.
  • 1/8" steel door: On a heavy-gauge steel body.
  • Two locking bolts: Round steel bolts secure the door.
  • Two interior shelves: Removable shelves separate the 19" tall interior.

Technical Specifications

Brand Hollon Safe
Model Number WSE-2114
Lock Type Digital electronic keypad with LCD display, key override
User Codes 1 master code, 1 user code
Overall Exterior with Flange (H x W x D) 22 3/16" x 14 15/16" x 4"
In-Wall Base (H x W x D) 21" x 13 7/8" x 3 3/4"
Interior (H x W x D) 19" x 14" x 3 1/8"
Depth Behind Keypad 1 3/8"
Interior Capacity 0.5 cubic feet
Door 1/8" steel
Locking Bolts 2 round steel bolts
Shelves 2 interior shelves
Weight Approx. 28-35 lbs (dealer listings vary)
Fire Rating None (not a fire safe)

Frequently Asked Questions

Will the WSE-2114 fit between my wall studs?

In most homes, yes. The in-wall base is 13 7/8" wide. Studs framed 16" on center leave about 14 1/2" of open space between them, so the base fits with a little room to spare. Use a stud finder and measure the actual gap first, since older or remodeled walls are not always on standard spacing.

Is my wall deep enough?

The base is 3 3/4" deep. A standard 2x4 stud is 3 1/2" deep, and drywall adds about 1/2" more, so a 2x4 wall with drywall gives roughly 4" from the face of the drywall to the back of the cavity. Check for pipes, wiring, ducts or insulation in the bay before cutting, and avoid exterior walls with sheathing directly behind the cavity if the depth is tight.

What size opening do I cut?

Cut the opening to fit the base, which is 21" high by 13 7/8" wide, and test-fit as you go. The 22 3/16" x 14 15/16" front flange overlaps the edges of the drywall to hide the cut.

How is it secured in the wall?

Fasten the body to the studs on each side with screws long enough to bite well into the framing. The safe's strength in a wood-framed wall depends on that connection. For more resistance, it can be set in a masonry or concrete wall instead.

What fits inside a 3 1/8 inch deep safe?

The interior is 19" high, 14" wide and 3 1/8" deep, about 0.5 cubic feet. Passports, cash, jewelry pouches, watches, documents in envelopes and spare keys fit well. The area directly behind the keypad is 1 3/8" deep, so plan around it. Measure any handgun or boxed item before counting on it fitting.

How many codes can the keypad hold?

The WSE-2114 keypad holds one master code and one user code, so two people can have their own codes.

The keypad is dead. How do I get in?

Use the override key to open the safe, then replace the battery. A weak or dead battery is by far the most common reason a keypad stops responding. Your code is kept when the battery is changed. Store the override key somewhere other than the safe itself.

Is the WSE-2114 fireproof?

No. Hollon does not give this wall safe a fire rating. It is designed to hide and lock up valuables. For fire protection, look at a fire-rated floor safe.

Are the shelves adjustable?

The safe comes with two interior shelves. They can be removed, but they are not adjustable.

How is the WSE-2114 different from the WS-BIO-1?

Both use the same in-wall body size and 0.5 cubic foot class interior. The WSE-2114 opens with a keypad code, while the WS-BIO-1 opens with a fingerprint reader that stores up to 20 fingerprints. Both have an override key.


Great reasons to buy from us:

  • Image of  topreasons
  • Image of  topreasons
  • Image of  topreasons
  • Image of  topreasons

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)